Alauda Container Platform
  • English

    • Provision with LocalVolumeSet

    A LocalVolumeSet provisions PersistentVolumes from devices that match a filter. The operator creates the StorageClass named in spec.storageClassName if it does not exist.

    Use LocalVolumeSet when disks should be claimed by size, type, or similar properties instead of by an explicit path list. For exact paths, see Provision with LocalVolume.

    WARNING

    Use LocalVolumeSet with care. When the operator provisions PersistentVolumes from local disks, it can claim every device that matches deviceInclusionSpec. Alauda Container Platform Local Disk Provisioner must be the only component managing those disks on the node. Do not create more than one LocalVolumeSet that selects the same node. Set maxDeviceCount when you must cap how many devices are provisioned per node.

    LocalVolumeSet does not support logical volume management (LVM) devices. Do not point it at LVM volumes. Use LVM Storage for LVM-backed dynamic volumes.

    TOC

    PrerequisitesProvision Block volumesBind a PersistentVolumeClaimAdd disks or nodes

    Prerequisites

    • Alauda Container Platform Local Disk Provisioner is installed. See Install.
    • Device discovery is running so you can confirm which disks are Available. See Discover local disks.
    • Matching devices are attached, not mounted, and have no child partitions when you select whole disks.

    Provision Block volumes

    This example creates a Block StorageClass named localblock and PersistentVolumes from matching whole disks.

    On a control plane node:

    cat << EOF | kubectl apply -f -
apiVersion: local.storage.openshift.io/v1alpha1
kind: LocalVolumeSet
metadata:
  name: local-block-disks
  namespace: acp-storage
spec:
  storageClassName: localblock
  volumeMode: Block
  maxDeviceCount: 2
  nodeSelector:
    nodeSelectorTerms:
      - matchExpressions:
          - key: kubernetes.io/hostname
            operator: In
            values:
              - worker-01
              - worker-02
              - worker-03
  deviceInclusionSpec:
    deviceTypes:
      - disk
    minSize: 10Gi
    maxSize: 2Ti
EOF
    1. Namespace where Alauda Container Platform Local Disk Provisioner is installed. The default is acp-storage.
    2. StorageClass for provisioned PersistentVolumes. The operator creates it if it does not exist. Use a name that uniquely identifies this set.
    3. Block or Filesystem. For Ceph OSD consumption and other raw-device users, use Block.
    4. Optional. Maximum number of matching devices provisioned per node. If omitted, every matching device on the selected nodes is claimed.
    5. Optional. Nodes that run matching. Get hostnames from kubectl get node. If omitted, matching runs on every node.
    6. Device types to include: disk, part, loop, or mpath. If the list is empty, only disk is selected. LVM devices are not supported.

    Optional deviceInclusionSpec filters:

    FieldValue source
    deviceTypesdisk, part, loop, or mpath. Empty means disk only.
    deviceMechanicalPropertiesRotational or NonRotational. Default is both.
    minSizeMinimum device size. Default is 1Gi when empty.
    maxSizeMaximum device size.
    modelsCase-insensitive substring of the disk MODEL string. Copy the value from LocalVolumeDiscoveryResult.status.discoveredDevices[].model, or from the MODEL column of lsblk -d -o NAME,TYPE,SIZE,MODEL,VENDOR,SERIAL on the node. A value such as SAMSUNG matches SAMSUNG MZVLB512.
    vendorsCase-insensitive substring of the disk VENDOR string. Copy the value from LocalVolumeDiscoveryResult.status.discoveredDevices[].vendor, or from the VENDOR column of the same lsblk command. This column is often a bus name such as ATA or NVMe, not the disk brand. The brand is usually in MODEL.

    If MODEL or VENDOR is empty (common on Virtio and many cloud disks), do not set models or vendors. Those filters will not match an empty string.

    Verify PersistentVolumes:

    kubectl get pv

    Example output:

    NAME                CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS      CLAIM        STORAGECLASS   REASON   AGE
local-pv-1cec77cf   100Gi      RWO            Delete           Available                localblock              88m
local-pv-2ef7cd2a   100Gi      RWO            Delete           Available                localblock              82m

    A disk that is plugged in later is provisioned automatically if it matches the filter and maxDeviceCount still allows it.

    Bind a PersistentVolumeClaim

    Create the claim in the project that will use the volume. For Block volumes, set volumeMode: Block. The request must not exceed the device capacity.

    cat << EOF | kubectl apply -f -
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: local-block-pvc
spec:
  accessModes:
    - ReadWriteOnce
  volumeMode: Block
  resources:
    requests:
      storage: 100Gi
  storageClassName: localblock
EOF
    1. Must match the LocalVolumeSet volumeMode.
    2. Must be less than or equal to the PersistentVolume capacity.
    3. Must match spec.storageClassName.

    Confirm the claim is bound:

    kubectl get pvc local-block-pvc

    Add disks or nodes

    • Add a disk: attach a disk that matches deviceInclusionSpec on a selected node. The operator provisions a PersistentVolume when the disk is Available and maxDeviceCount is not exceeded. You do not edit a path list.
    • Add a node: add the hostname to spec.nodeSelector on both the LocalVolumeSet and the LocalVolumeDiscovery that inventories that node. See Discover local disks.