Task [tekton.dev/v1]
tekton.dev group
Task represents a collection of sequential steps that are run as part of a Pipeline using a set of inputs and producing a set of outputs. Tasks execute when TaskRuns are created that provide the input parameters and resources and output resources the Task requires.
v1 versionspec object
Spec holds the desired state of the Task from the client
description string
Description is a user-facing description of the task that may be used to populate a UI.
displayName string
DisplayName is a user-facing name of the task that may be used to populate a UI.
params []object
ParamSpec defines arbitrary parameters needed beyond typed inputs (such as resources). Parameter values are provided by users as inputs on a TaskRun or PipelineRun.
default
Default is the value a parameter takes if no input value is supplied. If default is set, a Task may be executed without a supplied value for the parameter.
description string
Description is a user-facing description of the parameter that may be used to populate a UI.
enum []string
Enum declares a set of allowed param input values for tasks/pipelines that can be validated. If Enum is not set, no input validation is performed for the param.
name string required
Name declares the name by which a parameter is referenced.
properties object
Properties is the JSON Schema properties to support key-value pairs parameter.
type string
Type is the user-specified type of the parameter. The possible types are currently "string", "array" and "object", and "string" is the default.
results []object
TaskResult used to describe the results of a task
description string
Description is a human-readable description of the result
name string required
Name the given name
properties object
Properties is the JSON Schema properties to support key-value pairs results.
type string
Type is the user-specified type of the result. The possible type is currently "string" and will support "array" in following work.
value
Value the expression used to retrieve the value of the result from an underlying Step.
sidecars []object
Sidecar has nearly the same data structure as Step but does not have the ability to timeout.
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Sidecar's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Sidecar's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
computeResources object
ComputeResources required by this Sidecar. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
Image reference name. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle object
Actions that the management system should take in response to Sidecar lifecycle events. Cannot be updated.
postStart object
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
preStop object
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
livenessProbe object
Periodic probe of Sidecar liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
name string required
Name of the Sidecar specified as a DNS_LABEL. Each Sidecar in a Task must have a unique name (DNS_LABEL). Cannot be updated.
ports []object
ContainerPort represents a network port in a single container.
containerPort integer required
Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
hostIP string
What host IP to bind the external port to.
hostPort integer
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
name string
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
protocol string
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".
readinessProbe object
Periodic probe of Sidecar service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
restartPolicy string
RestartPolicy refers to kubernetes RestartPolicy. It can only be set for an initContainer and must have it's policy set to "Always". It is currently left optional to help support Kubernetes versions prior to 1.29 when this feature was introduced.
script string
Script is the contents of an executable file to execute.
If Script is not empty, the Step cannot have an Command or Args.
securityContext object
SecurityContext defines the security options the Sidecar should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
startupProbe object
StartupProbe indicates that the Pod the Sidecar is running in has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
stdin boolean
Whether this Sidecar should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the Sidecar will always result in EOF. Default is false.
stdinOnce boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on Sidecar start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the Sidecar is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
terminationMessagePath string
Optional: Path at which the file to which the Sidecar's termination message will be written is mounted into the Sidecar's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
terminationMessagePolicy string
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the Sidecar status message on both success and failure. FallbackToLogsOnError will use the last chunk of Sidecar log output if the termination message file is empty and the Sidecar exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
tty boolean
Whether this Sidecar should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
workingDir string
Sidecar's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
workspaces []object
WorkspaceUsage is used by a Step or Sidecar to declare that it wants isolated access to a Workspace defined in a Task.
mountPath string required
MountPath is the path that the workspace should be mounted to inside the Step or Sidecar, overriding any MountPath specified in the Task's WorkspaceDeclaration.
name string required
Name is the name of the workspace this Step or Sidecar wants access to.
stepTemplate object
StepTemplate can be used as the basis for all step containers within the Task, so that the steps inherit settings on the base container.
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Step's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Step's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
computeResources object
ComputeResources required by this Step. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
Image reference name. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
securityContext object
SecurityContext defines the security options the Step should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
workingDir string
Step's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
steps []object
Step runs a subcomponent of a Task
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
computeResources object
ComputeResources required by this Step. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
OCI image name. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
name string required
Name of the Step specified as a DNS_LABEL. Each Step in a Task must have a unique name.
onError string
OnError defines the exiting behavior of a container on error can be set to [ continue | stopAndFail ]
params []object
Param declares an ParamValues to use for the parameter called name.
name string required
value required
ref object
Contains the reference to an existing StepAction.
name string
Name of the referenced step
params []object
Param declares an ParamValues to use for the parameter called name.
name string required
value required
resolver string
Resolver is the name of the resolver that should perform resolution of the referenced Tekton resource, such as "git".
results []object
StepResult used to describe the Results of a Step.
description string
Description is a human-readable description of the result
name string required
Name the given name
properties object
Properties is the JSON Schema properties to support key-value pairs results.
type string
The possible types are 'string', 'array', and 'object', with 'string' as the default.
script string
Script is the contents of an executable file to execute.
If Script is not empty, the Step cannot have an Command and the Args will be passed to the Script.
securityContext object
SecurityContext defines the security options the Step should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
stderrConfig object
Stores configuration for the stderr stream of the step.
path string
Path to duplicate stdout stream to on container's local filesystem.
stdoutConfig object
Stores configuration for the stdout stream of the step.
path string
Path to duplicate stdout stream to on container's local filesystem.
timeout string
Timeout is the time after which the step times out. Defaults to never. Refer to Go's ParseDuration documentation for expected format: https://golang.org/pkg/time/#ParseDuration
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
when []object
WhenExpression allows a PipelineTask to declare expressions to be evaluated before the Task is run to determine whether the Task should be executed or skipped
cel string
CEL is a string of Common Language Expression, which can be used to conditionally execute the task based on the result of the expression evaluation More info about CEL syntax: https://github.com/google/cel-spec/blob/master/doc/langdef.md
input string
Input is the string for guard checking which can be a static input or an output from a parent Task
operator string
Operator that represents an Input's relationship to the values
values []string
Values is an array of strings, which is compared against the input, for guard checking It must be non-empty
workingDir string
Step's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
workspaces []object
WorkspaceUsage is used by a Step or Sidecar to declare that it wants isolated access to a Workspace defined in a Task.
mountPath string required
MountPath is the path that the workspace should be mounted to inside the Step or Sidecar, overriding any MountPath specified in the Task's WorkspaceDeclaration.
name string required
Name is the name of the workspace this Step or Sidecar wants access to.
volumes
Volumes is a collection of volumes that are available to mount into the steps of the build. See Pod.spec.volumes (API version: v1)
workspaces []object
WorkspaceDeclaration is a declaration of a volume that a Task requires.
description string
Description is an optional human readable description of this volume.
mountPath string
MountPath overrides the directory that the volume will be made available at.
name string required
Name is the name by which you can bind the volume at runtime.
optional boolean
Optional marks a Workspace as not being required in TaskRuns. By default this field is false and so declared workspaces are required.
readOnly boolean
ReadOnly dictates whether a mounted volume is writable. By default this field is false and so mounted volumes are writable.
Task represents a collection of sequential steps that are run as part of a Pipeline using a set of inputs and producing a set of outputs. Tasks execute when TaskRuns are created that provide the input parameters and resources and output resources the Task requires.
Deprecated: Please use v1.Task instead.
v1beta1 versionspec object
Spec holds the desired state of the Task from the client
description string
Description is a user-facing description of the task that may be used to populate a UI.
displayName string
DisplayName is a user-facing name of the task that may be used to populate a UI.
params []object
ParamSpec defines arbitrary parameters needed beyond typed inputs (such as resources). Parameter values are provided by users as inputs on a TaskRun or PipelineRun.
default
Default is the value a parameter takes if no input value is supplied. If default is set, a Task may be executed without a supplied value for the parameter.
description string
Description is a user-facing description of the parameter that may be used to populate a UI.
enum []string
Enum declares a set of allowed param input values for tasks/pipelines that can be validated. If Enum is not set, no input validation is performed for the param.
name string required
Name declares the name by which a parameter is referenced.
properties object
Properties is the JSON Schema properties to support key-value pairs parameter.
type string
Type is the user-specified type of the parameter. The possible types are currently "string", "array" and "object", and "string" is the default.
resources object
Resources is a list input and output resource to run the task Resources are represented in TaskRuns as bindings to instances of PipelineResources.
Deprecated: Unused, preserved only for backwards compatibility
inputs []object
TaskResource defines an input or output Resource declared as a requirement
by a Task. The Name field will be used to refer to these Resources within
the Task definition, and when provided as an Input, the Name will be the
path to the volume mounted containing this Resource as an input (e.g.
an input Resource named workspace will be mounted at /workspace).
Deprecated: Unused, preserved only for backwards compatibility
description string
Description is a user-facing description of the declared resource that may be used to populate a UI.
name string required
Name declares the name by which a resource is referenced in the definition. Resources may be referenced by name in the definition of a Task's steps.
optional boolean
Optional declares the resource as optional. By default optional is set to false which makes a resource required. optional: true - the resource is considered optional optional: false - the resource is considered required (equivalent of not specifying it)
targetPath string
TargetPath is the path in workspace directory where the resource will be copied.
type string required
Type is the type of this resource;
outputs []object
TaskResource defines an input or output Resource declared as a requirement
by a Task. The Name field will be used to refer to these Resources within
the Task definition, and when provided as an Input, the Name will be the
path to the volume mounted containing this Resource as an input (e.g.
an input Resource named workspace will be mounted at /workspace).
Deprecated: Unused, preserved only for backwards compatibility
description string
Description is a user-facing description of the declared resource that may be used to populate a UI.
name string required
Name declares the name by which a resource is referenced in the definition. Resources may be referenced by name in the definition of a Task's steps.
optional boolean
Optional declares the resource as optional. By default optional is set to false which makes a resource required. optional: true - the resource is considered optional optional: false - the resource is considered required (equivalent of not specifying it)
targetPath string
TargetPath is the path in workspace directory where the resource will be copied.
type string required
Type is the type of this resource;
results []object
TaskResult used to describe the results of a task
description string
Description is a human-readable description of the result
name string required
Name the given name
properties object
Properties is the JSON Schema properties to support key-value pairs results.
type string
Type is the user-specified type of the result. The possible type is currently "string" and will support "array" in following work.
value
Value the expression used to retrieve the value of the result from an underlying Step.
sidecars []object
Sidecar has nearly the same data structure as Step but does not have the ability to timeout.
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Sidecar's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
Image name to be used by the Sidecar. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle object
Actions that the management system should take in response to Sidecar lifecycle events. Cannot be updated.
postStart object
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
preStop object
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
livenessProbe object
Periodic probe of Sidecar liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
name string required
Name of the Sidecar specified as a DNS_LABEL. Each Sidecar in a Task must have a unique name (DNS_LABEL). Cannot be updated.
ports []object
ContainerPort represents a network port in a single container.
containerPort integer required
Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
hostIP string
What host IP to bind the external port to.
hostPort integer
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
name string
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
protocol string
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".
readinessProbe object
Periodic probe of Sidecar service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
resources object
Compute Resources required by this Sidecar. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
restartPolicy string
RestartPolicy refers to kubernetes RestartPolicy. It can only be set for an initContainer and must have it's policy set to "Always". It is currently left optional to help support Kubernetes versions prior to 1.29 when this feature was introduced.
script string
Script is the contents of an executable file to execute.
If Script is not empty, the Step cannot have an Command or Args.
securityContext object
SecurityContext defines the security options the Sidecar should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
startupProbe object
StartupProbe indicates that the Pod the Sidecar is running in has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
stdin boolean
Whether this Sidecar should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the Sidecar will always result in EOF. Default is false.
stdinOnce boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on Sidecar start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the Sidecar is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
terminationMessagePath string
Optional: Path at which the file to which the Sidecar's termination message will be written is mounted into the Sidecar's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
terminationMessagePolicy string
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the Sidecar status message on both success and failure. FallbackToLogsOnError will use the last chunk of Sidecar log output if the termination message file is empty and the Sidecar exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
tty boolean
Whether this Sidecar should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
workingDir string
Sidecar's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
workspaces []object
WorkspaceUsage is used by a Step or Sidecar to declare that it wants isolated access to a Workspace defined in a Task.
mountPath string required
MountPath is the path that the workspace should be mounted to inside the Step or Sidecar, overriding any MountPath specified in the Task's WorkspaceDeclaration.
name string required
Name is the name of the workspace this Step or Sidecar wants access to.
stepTemplate object
StepTemplate can be used as the basis for all step containers within the Task, so that the steps inherit settings on the base container.
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Step's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The OCI image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the Step's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
Default image name to use for each Step. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle object
Actions that the management system should take in response to container lifecycle events. Cannot be updated.
Deprecated: This field will be removed in a future release.
postStart object
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
preStop object
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
livenessProbe object
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
name string required
Default name for each Step specified as a DNS_LABEL. Each Step in a Task must have a unique name. Cannot be updated.
Deprecated: This field will be removed in a future release.
ports []object
ContainerPort represents a network port in a single container.
containerPort integer required
Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
hostIP string
What host IP to bind the external port to.
hostPort integer
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
name string
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
protocol string
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".
readinessProbe object
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
resources object
Compute Resources required by this Step. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
securityContext object
SecurityContext defines the security options the Step should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
startupProbe object
DeprecatedStartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
stdin boolean
Whether this Step should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the Step will always result in EOF. Default is false.
Deprecated: This field will be removed in a future release.
stdinOnce boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
Deprecated: This field will be removed in a future release.
terminationMessagePath string
Deprecated: This field will be removed in a future release and cannot be meaningfully used.
terminationMessagePolicy string
Deprecated: This field will be removed in a future release and cannot be meaningfully used.
tty boolean
Whether this Step should allocate a DeprecatedTTY for itself, also requires 'stdin' to be true. Default is false.
Deprecated: This field will be removed in a future release.
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
workingDir string
Step's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
steps []object
Step runs a subcomponent of a Task
args []string
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command []string
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
env []object
EnvVar represents an environment variable present in a Container.
name string required
Name of the environment variable. Must be a C_IDENTIFIER.
value string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom object
Source for the environment variable's value. Cannot be used if value is not empty.
configMapKeyRef object
Selects a key of a ConfigMap.
key string required
The key to select.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap or its key must be defined
fieldRef object
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'],
spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
apiVersion string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath string required
Path of the field to select in the specified API version.
resourceFieldRef object
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
containerName string
Container name: required for volumes, optional for env vars
divisor
Specifies the output format of the exposed resources, defaults to "1"
resource string required
Required: resource to select
secretKeyRef object
Selects a key of a secret in the pod's namespace
key string required
The key of the secret to select from. Must be a valid secret key.
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret or its key must be defined
envFrom []object
EnvFromSource represents the source of a set of ConfigMaps
configMapRef object
The ConfigMap to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the ConfigMap must be defined
prefix string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef object
The Secret to select from
name string
Name of the referent. This field is effectively required, but due to backwards compatibility is allowed to be empty. Instances of this type with an empty value here are almost certainly wrong. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional boolean
Specify whether the Secret must be defined
image string
Image reference name to run for this Step. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle object
Actions that the management system should take in response to container lifecycle events. Cannot be updated.
Deprecated: This field will be removed in a future release.
postStart object
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
preStop object
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
sleep object
Sleep represents a duration that the container should sleep.
seconds integer required
Seconds is the number of seconds to sleep.
tcpSocket object
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for backward compatibility. There is no validation of this field and lifecycle hooks will fail at runtime when it is specified.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
livenessProbe object
Periodic probe of container liveness. Step will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
name string required
Name of the Step specified as a DNS_LABEL. Each Step in a Task must have a unique name.
onError string
OnError defines the exiting behavior of a container on error can be set to [ continue | stopAndFail ]
params []object
Param declares an ParamValues to use for the parameter called name.
name string required
value required
ports []object
ContainerPort represents a network port in a single container.
containerPort integer required
Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
hostIP string
What host IP to bind the external port to.
hostPort integer
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
name string
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
protocol string
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".
readinessProbe object
Periodic probe of container service readiness. Step will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
ref object
Contains the reference to an existing StepAction.
name string
Name of the referenced step
params []object
Param declares an ParamValues to use for the parameter called name.
name string required
value required
resolver string
Resolver is the name of the resolver that should perform resolution of the referenced Tekton resource, such as "git".
resources object
Compute Resources required by this Step. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
claims []object
ResourceClaim references one entry in PodSpec.ResourceClaims.
name string required
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.
request string
Request is the name chosen for a request in the referenced claim. If empty, everything from the claim is made available, otherwise only the result of this request.
limits object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
results []object
StepResult used to describe the Results of a Step.
description string
Description is a human-readable description of the result
name string required
Name the given name
properties object
Properties is the JSON Schema properties to support key-value pairs results.
type string
The possible types are 'string', 'array', and 'object', with 'string' as the default.
script string
Script is the contents of an executable file to execute.
If Script is not empty, the Step cannot have an Command and the Args will be passed to the Script.
securityContext object
SecurityContext defines the security options the Step should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
allowPrivilegeEscalation boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is:
- run as Privileged
- has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile object
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type string required
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.
capabilities object
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
add []string
Added capabilities
drop []string
Removed capabilities
privileged boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount string
procMount denotes the type of proc mount to use for the containers. The default value is Default which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions object
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
level string
Level is SELinux level label that applies to the container.
role string
Role is a SELinux role label that applies to the container.
type string
Type is a SELinux type label that applies to the container.
user string
User is a SELinux user label that applies to the container.
seccompProfile object
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
localhostProfile string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type string required
type indicates which kind of seccomp profile will be applied. Valid options are:
Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.
windowsOptions object
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
gmsaCredentialSpec string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
startupProbe object
DeprecatedStartupProbe indicates that the Pod this Step runs in has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
Deprecated: This field will be removed in a future release.
exec object
Exec specifies a command to execute in the container.
command []string
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
failureThreshold integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc object
GRPC specifies a GRPC HealthCheckRequest.
port integer required
Port number of the gRPC service. Number must be in the range 1 to 65535.
service string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
If this is not specified, the default behavior is defined by gRPC.
httpGet object
HTTPGet specifies an HTTP GET request to perform.
host string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders []object
HTTPHeader describes a custom header to be used in HTTP probes
name string required
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value string required
The header field value
path string
Path to access on the HTTP server.
port required
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme string
Scheme to use for connecting to the host. Defaults to HTTP.
initialDelaySeconds integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket object
TCPSocket specifies a connection to a TCP port.
host string
Optional: Host name to connect to, defaults to the pod IP.
port required
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
terminationGracePeriodSeconds integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
stderrConfig object
Stores configuration for the stderr stream of the step.
path string
Path to duplicate stdout stream to on container's local filesystem.
stdin boolean
Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.
Deprecated: This field will be removed in a future release.
stdinOnce boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
Deprecated: This field will be removed in a future release.
stdoutConfig object
Stores configuration for the stdout stream of the step.
path string
Path to duplicate stdout stream to on container's local filesystem.
terminationMessagePath string
Deprecated: This field will be removed in a future release and can't be meaningfully used.
terminationMessagePolicy string
Deprecated: This field will be removed in a future release and can't be meaningfully used.
timeout string
Timeout is the time after which the step times out. Defaults to never. Refer to Go's ParseDuration documentation for expected format: https://golang.org/pkg/time/#ParseDuration
tty boolean
Whether this container should allocate a DeprecatedTTY for itself, also requires 'stdin' to be true. Default is false.
Deprecated: This field will be removed in a future release.
volumeDevices []object
volumeDevice describes a mapping of a raw block device within a container.
devicePath string required
devicePath is the path inside of the container that the device will be mapped to.
name string required
name must match the name of a persistentVolumeClaim in the pod
volumeMounts []object
VolumeMount describes a mounting of a Volume within a container.
mountPath string required
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name string required
This must match the Name of a Volume.
readOnly boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively.
If ReadOnly is false, this field has no meaning and must be unspecified.
If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason.
If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None).
If this field is not specified, it is treated as an equivalent of Disabled.
subPath string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
when []object
WhenExpression allows a PipelineTask to declare expressions to be evaluated before the Task is run to determine whether the Task should be executed or skipped
cel string
CEL is a string of Common Language Expression, which can be used to conditionally execute the task based on the result of the expression evaluation More info about CEL syntax: https://github.com/google/cel-spec/blob/master/doc/langdef.md
input string
Input is the string for guard checking which can be a static input or an output from a parent Task
operator string
Operator that represents an Input's relationship to the values
values []string
Values is an array of strings, which is compared against the input, for guard checking It must be non-empty
workingDir string
Step's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
workspaces []object
WorkspaceUsage is used by a Step or Sidecar to declare that it wants isolated access to a Workspace defined in a Task.
mountPath string required
MountPath is the path that the workspace should be mounted to inside the Step or Sidecar, overriding any MountPath specified in the Task's WorkspaceDeclaration.
name string required
Name is the name of the workspace this Step or Sidecar wants access to.
volumes
Volumes is a collection of volumes that are available to mount into the steps of the build. See Pod.spec.volumes (API version: v1)
workspaces []object
WorkspaceDeclaration is a declaration of a volume that a Task requires.
description string
Description is an optional human readable description of this volume.
mountPath string
MountPath overrides the directory that the volume will be made available at.
name string required
Name is the name by which you can bind the volume at runtime.
optional boolean
Optional marks a Workspace as not being required in TaskRuns. By default this field is false and so declared workspaces are required.
readOnly boolean
ReadOnly dictates whether a mounted volume is writable. By default this field is false and so mounted volumes are writable.